# Multiple Pimoroni VL53L1X Time of Flight sensor breakouts

**URL:** <https://forums.pimoroni.com/t/multiple-pimoroni-vl53l1x-time-of-flight-sensor-breakouts/12285>\
**Category:** Support\
**Created:** [November 30, 2019, 9:30am UTC](https://forums.pimoroni.com/t/multiple-pimoroni-vl53l1x-time-of-flight-sensor-breakouts/12285 "2019-11-30T09:30:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ajalexsmith](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/ajalexsmith/32/2141_2.png) [@ajalexsmith](https://forums.pimoroni.com/u/ajalexsmith)\
**Post date:** [November 30, 2019, 9:30am UTC](https://forums.pimoroni.com/t/multiple-pimoroni-vl53l1x-time-of-flight-sensor-breakouts/12285/1 "2019-11-30T09:30:12Z")

</div>

Hello,

I’m prepping for my next PiWars entry, last year I used one of the Pimoroni VL53L1X Time of Flight sensor breakouts however this year I wanted to notch it up and use 4 for more of a field of view.

I know you can bridge 2 pads on the back to increase the i2c address by 1, but is it possible to give them 4 unique addresses?

Alex

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [November 30, 2019, 10:09am UTC](https://forums.pimoroni.com/t/multiple-pimoroni-vl53l1x-time-of-flight-sensor-breakouts/12285/2 "2019-11-30T10:09:09Z")

</div>

There is a link to a data sheet on the product page, you might get lucky and find the address info in it.  
[https://cdn.shopify.com/s/files/1/0174/1800/files/vl53l1x.pdf?3713516543837568345](https://cdn.shopify.com/s/files/1/0174/1800/files/vl53l1x.pdf?3713516543837568345)