# My first soldering

**URL:** <https://forums.pimoroni.com/t/my-first-soldering/8038>\
**Category:** Electronics\
**Created:** [June 28, 2018, 9:19pm UTC](https://forums.pimoroni.com/t/my-first-soldering/8038 "2018-06-28T21:19:07Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![strickvl](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/strickvl/32/4252_2.png) [@strickvl](https://forums.pimoroni.com/u/strickvl)\
**Post date:** [June 28, 2018, 9:19pm UTC](https://forums.pimoroni.com/t/my-first-soldering/8038/1 "2018-06-28T21:19:07Z")

</div>

Two photos from my attempt to solder today. First time using a soldering iron. I’m feeling relatively good about how this turned out!

Letting it cool down for a bit before I see if the BME680 board is still working!

![Photo%2028-06-2018%2C%2022%2016%2039](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/f/f46c908e77f1d959d315936047e2c94f0929ee7b.jpg) ![Photo%2028-06-2018%2C%2022%2015%2041](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/6/6e0b30ab81bee8bbc7b7565c98517bd5f7008909.jpg)

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [June 29, 2018, 9:10am UTC](https://forums.pimoroni.com/t/my-first-soldering/8038/2 "2018-06-29T09:10:06Z")

</div>

Looks pretty good to me. What I do is skip a pin, and do every second pin. Then go back to the start and do the ones I skipped. It spreads the heat out for less chance of damaging something. On the GPIO headers I do every second pin on one row. Then do the same for the second row. Then go back to row 1 and do the ones I skipped. It’s an old habit I picked up many years ago. It spreads the heat out and by the time you back to the beginning again its all cooled off.  
Anyway, nice job, have fun. =)

---

<div class="post-metadata">

**Author:** ![strickvl](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/strickvl/32/4252_2.png) [@strickvl](https://forums.pimoroni.com/u/strickvl)\
**Post date:** [June 29, 2018, 10:32am UTC](https://forums.pimoroni.com/t/my-first-soldering/8038/3 "2018-06-29T10:32:40Z")

</div>

That’s a great idea! Thanks for the tip!

---

<div class="post-metadata">

**Author:** ![jukebox19](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/jukebox19/32/4922_2.png) [@jukebox19](https://forums.pimoroni.com/u/jukebox19)\
**Post date:** [December 15, 2018, 2:13pm UTC](https://forums.pimoroni.com/t/my-first-soldering/8038/4 "2018-12-15T14:13:48Z")

</div>

Hi there. i agree - nice job. I know that this is probably obvious anyway, but I would add that the size of soldering iron is important - use the smallest wattage as possible.

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [December 15, 2018, 5:59pm UTC](https://forums.pimoroni.com/t/my-first-soldering/8038/5 "2018-12-15T17:59:02Z")

</div>

Having the right sized tip helps too. Found this.  
[https://learn.pimoroni.com/tutorial/sandyj/the-ultimate-guide-to-soldering](https://learn.pimoroni.com/tutorial/sandyj/the-ultimate-guide-to-soldering)

---

<div class="post-metadata">

**Author:** ![jukebox19](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/jukebox19/32/4922_2.png) [@jukebox19](https://forums.pimoroni.com/u/jukebox19)\
**Post date:** [December 16, 2018, 9:28am UTC](https://forums.pimoroni.com/t/my-first-soldering/8038/6 "2018-12-16T09:28:29Z")

</div>

Very useful info. on that link for beginners.

---

<div class="post-metadata">

**Author:** ![Crowbot](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/crowbot/32/5888_2.png) [@Crowbot](https://forums.pimoroni.com/u/Crowbot)\
**Post date:** [October 28, 2019, 3:24pm UTC](https://forums.pimoroni.com/t/my-first-soldering/8038/7 "2019-10-28T15:24:47Z")

</div>

Excellent first try. One tip is to use the thinnest solder you can get. It gives better control over how much solder goes into the joint. Ideally you want it to look like this:  
 ![](https://www.globalspec.com/ImageRepository/LearnMore/20148/betterfig55d030e3f1c96482390d39b07e5716ec2.png)
