# New Picade Joystick and Buttons do not work

**URL:** <https://forums.pimoroni.com/t/new-picade-joystick-and-buttons-do-not-work/8576>\
**Category:** Support\
**Created:** [September 1, 2018, 5:23pm UTC](https://forums.pimoroni.com/t/new-picade-joystick-and-buttons-do-not-work/8576 "2018-09-01T17:23:49Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![ipadeflteacher](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/ipadeflteacher/32/4021_2.png) [@ipadeflteacher](https://forums.pimoroni.com/u/ipadeflteacher)\
**Post date:** [September 1, 2018, 5:23pm UTC](https://forums.pimoroni.com/t/new-picade-joystick-and-buttons-do-not-work/8576/1 "2018-09-01T17:23:49Z")

</div>

This is my second Picade. I was able to get the first edition working with little problems. However, I’m having a few big problems with the new one.

First, none of the buttons or joystick works. After connecting everything I typed in the command curl -sS [https://get.pimoroni.com/picadehat](https://get.pimoroni.com/picadehat) | bash But I couldn’t type the | symbol. Does that make a difference?

I reconnected all the buttons, joystick, but still nothing works. I have the right power supply and a working version of retropie. I double checked all the connections!

My power button will turn on my picade but it doesn’t turn it off.

No sound

I’ve been following this thread [PICADE - X Hat- Buttons + Joystick not detecting](https://forums.pimoroni.com/t/picade-x-hat-buttons-joystick-not-detecting/8507/8)

but it hasn’t helped me fix any of my problems.

---

<div class="post-metadata">

**Author:** ![sandyjmacdonald](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/sandyjmacdonald/32/393_2.png) [@sandyjmacdonald](https://forums.pimoroni.com/u/sandyjmacdonald)\
**Post date:** [September 1, 2018, 5:37pm UTC](https://forums.pimoroni.com/t/new-picade-joystick-and-buttons-do-not-work/8576/2 "2018-09-01T17:37:01Z")

</div>

The fact that you can’t type the `|` symbol will absolutely cause problems! It means that the software install won’t work and everything that you describe - no controls, no power down, no sound.

You’ll need to find a way to type the one line install with the `|` symbol.

Do you know how to use SSH?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [September 1, 2018, 7:36pm UTC](https://forums.pimoroni.com/t/new-picade-joystick-and-buttons-do-not-work/8576/3 "2018-09-01T19:36:06Z")

</div>

I have the same no | pipe symbol problem on my keyboard with the default UK layout in Raspbian. Once I switch to English US its where it should be. Doing a copy past while SSH’d in will work as far as I know.  
I don’t know how you change keyboard layout in Picade?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [September 1, 2018, 7:44pm UTC](https://forums.pimoroni.com/t/new-picade-joystick-and-buttons-do-not-work/8576/4 "2018-09-01T19:44:00Z")

</div>

> [@For those in the states](https://forums.pimoroni.com/t/for-those-in-the-states/8425/2):
>
> Here in Canada I ran into the same no | key issue with my English US keyboard. I ran sudo raspi-config and tried to fix it that way but failed miserably. I tried 4 or 5 of the US keyboard layouts and still didn’t have the | symbol. That made running the one line installer impossible. I gave up running Raspbian Lite as a result and switched to the full Raspbian. Changing my keyboard layout from the configuration GUI then worked. Will give your file edit a try next install though, thanks for the t…

---

<div class="post-metadata">

**Author:** ![ipadeflteacher](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/ipadeflteacher/32/4021_2.png) [@ipadeflteacher](https://forums.pimoroni.com/u/ipadeflteacher)\
**Post date:** [September 2, 2018, 8:26am UTC](https://forums.pimoroni.com/t/new-picade-joystick-and-buttons-do-not-work/8576/5 "2018-09-02T08:26:17Z")

</div>

Once I used raspi-config and changed the keyboard to a generic US keyboard it worked!!!  
Thanks!!!

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [September 2, 2018, 9:22am UTC](https://forums.pimoroni.com/t/new-picade-joystick-and-buttons-do-not-work/8576/6 "2018-09-02T09:22:01Z")

</div>

Glad to hear it was that easy.

---

<div class="post-metadata">

**Author:** ![gordon](https://avatars.discourse-cdn.com/v4/letter/g/3da27b/32.png) [@gordon](https://forums.pimoroni.com/u/gordon)\
**Post date:** [January 28, 2020, 1:16am UTC](https://forums.pimoroni.com/t/new-picade-joystick-and-buttons-do-not-work/8576/7 "2020-01-28T01:16:58Z")

</div>

I am using a US keyboard and to get the pipe symbol I use ALT + ~  
Where the ~ key is the top right key next to ‘1’  
And the ALT is the right-hand ALT key.
