# NVMe Base speeds?

**URL:** <https://forums.pimoroni.com/t/nvme-base-speeds/25173>\
**Category:** Support\
**Created:** [July 26, 2024, 11:08pm UTC](https://forums.pimoroni.com/t/nvme-base-speeds/25173 "2024-07-26T23:08:53Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![eiger3970](https://avatars.discourse-cdn.com/v4/letter/e/8edcca/32.png) [@eiger3970](https://forums.pimoroni.com/u/eiger3970)\
**Post date:** [July 26, 2024, 11:08pm UTC](https://forums.pimoroni.com/t/nvme-base-speeds/25173/1 "2024-07-26T23:08:53Z")

</div>

Hello,  
is there a difference in the speed of the physical interfaces of the NVMe and the PCIe ribbon connection please?

My noob understanding is that the NVMe SSD itself has speeds like this general rule:  
Gen **1** 2 tracks = 2^ **1** = 2 Gbps, 4 tracks = 4 Gbps  
Gen **2** 2 tracks = 2^ **2** = 4 Gbps, 4 tracks = 8 Gbps  
Gen **3** 2 tracks = 2^ **3** = 8 Gbps, 4 tracks = 16 Gbps  
Gen **4** 2 tracks = 2^ **4** = 16 Gbps, 4 tracks = 32 Gbps  
Gen **5** 2 tracks = 2^ **5** = 32 Gbps, 4 tracks = 64 Gbps  
Gen **6** 2 tracks = 2^ **6** = 64 Gbps, 4 tracks = 128 Gbps  
Gen **7** 2 tracks = 2^ **7** = 128 Gbps, 4 tracks = 256 Gbps

However if the interface for theNVMe or the PCIe ribbon is slower, the data transfer speed is impacted.

The web link image shows the NVMe interface speed as PCIe 2|3, what does that mean?

The web link image doesn’t show the PCIe ribbon interface info, so what speed please?

I’m looking at the single [NVMe base](https://shop.pimoroni.com/products/nvme-base?variant=41219587178579).

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [July 27, 2024, 7:43am UTC](https://forums.pimoroni.com/t/nvme-base-speeds/25173/2 "2024-07-27T07:43:49Z")

</div>

I do believe on the Pi 5 end of things its a **Single-lane** PCIe 2.0 interface (500 MB/s peak transfer rate)

---

<div class="post-metadata">

**Author:** ![eiger3970](https://avatars.discourse-cdn.com/v4/letter/e/8edcca/32.png) [@eiger3970](https://forums.pimoroni.com/u/eiger3970)\
**Post date:** [July 27, 2024, 11:49am UTC](https://forums.pimoroni.com/t/nvme-base-speeds/25173/3 "2024-07-27T11:49:31Z")

</div>

Wow, 4 Gbps is not much.  
I’m curious what the Pimoroni’s NVMe base adaptor and ribbon interfaces speed might be too please?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [July 27, 2024, 5:02pm UTC](https://forums.pimoroni.com/t/nvme-base-speeds/25173/4 "2024-07-27T17:02:51Z")

</div>

From the product page.  
[NVMe Base for Raspberry Pi 5 – NVMe Base (pimoroni.com)](https://shop.pimoroni.com/products/nvme-base?variant=41219587178579)

The Raspberry Pi 5 will run at PCIe 3.0 x 1 speeds at best, even though this mode is unsupported officially, so most drives are limited to around 700-800MB/s read and 350-450MB write at peak.

---

<div class="post-metadata">

**Author:** ![eiger3970](https://avatars.discourse-cdn.com/v4/letter/e/8edcca/32.png) [@eiger3970](https://forums.pimoroni.com/u/eiger3970)\
**Post date:** [July 27, 2024, 11:01pm UTC](https://forums.pimoroni.com/t/nvme-base-speeds/25173/5 "2024-07-27T23:01:38Z")

</div>

Thanks, so:  
Raspberry Pi PCIe 3.0 x 1 = 5.6-6.4 Gbps read and 2.8-3.6 Gbps write at peak.

My question is really about the NVMe board slot and ribbon, whether they affect the speed of a purchased NVMe SSD at all?  
I can read on the Pimoronie [image](https://shop.pimoroni.com/products/nvme-base?variant=41219587178579) M.2 M-KEY 1x PCIe 2|3, so I’m assuming the board’s PCIe slot and ribbon are for an NVMe PCIe SSD gen 2 or 3?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [July 28, 2024, 7:59am UTC](https://forums.pimoroni.com/t/nvme-base-speeds/25173/6 "2024-07-28T07:59:48Z")

</div>

That I don’t know? You’ll likely have to e-mail tech support for that info.  
[Contact Us for Raspberry Pi Technical Support - Pimoroni](https://shop.pimoroni.com/pages/contact-us)
