# Off Set Unicorn Hat

**URL:** <https://forums.pimoroni.com/t/off-set-unicorn-hat/3002>\
**Category:** Support\
**Created:** [September 9, 2016, 9:56am UTC](https://forums.pimoroni.com/t/off-set-unicorn-hat/3002 "2016-09-09T09:56:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MilesAndNova](https://avatars.discourse-cdn.com/v4/letter/m/e274bd/32.png) [@MilesAndNova](https://forums.pimoroni.com/u/MilesAndNova)\
**Post date:** [September 9, 2016, 9:56am UTC](https://forums.pimoroni.com/t/off-set-unicorn-hat/3002/1 "2016-09-09T09:56:14Z")

</div>

Dear Humans,  
my firsat project with my daughter it the Hat, but she wants it offset, no on the Pi, , , is there a cable , if so reference please, , I have a diffuser for it, , , can I just bolt it onto a wooden board with the diffuser over the top,  
Many thanks  
Miles

---

<div class="post-metadata">

**Author:** ![gadgetoid](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/gadgetoid/32/13_2.png) [@gadgetoid](https://forums.pimoroni.com/u/gadgetoid)\
**Post date:** [September 9, 2016, 10:26am UTC](https://forums.pimoroni.com/t/off-set-unicorn-hat/3002/2 "2016-09-09T10:26:38Z")

</div>

Mini Black HAT Hack3r might be your best best: [https://shop.pimoroni.com/products/mini-black-hat-hack3r](https://shop.pimoroni.com/products/mini-black-hat-hack3r)

Take special care to make sure it’s connected to the Pi like the one in the full-sized Black HAT Hack3r photo found here: [https://shop.pimoroni.com/products/black-hat-hacker](https://shop.pimoroni.com/products/black-hat-hacker)

---

<div class="post-metadata">

**Author:** ![archieroques](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/archieroques/32/1119_2.png) [@archieroques](https://forums.pimoroni.com/u/archieroques)\
**Post date:** [September 11, 2016, 5:55pm UTC](https://forums.pimoroni.com/t/off-set-unicorn-hat/3002/3 "2016-09-11T17:55:38Z")

</div>

In answer to your second question, you could indeed bolt it to a bit of wood, as long as you run some beefy wires between the required pins from the HAT and the required pins on the Pi.

The pinouts for the Unicorn HAT are here: [http://pinout.xyz/pinout/unicorn\_hat](http://pinout.xyz/pinout/unicorn_hat)