# Old model: does not power on

**URL:** <https://forums.pimoroni.com/t/old-model-does-not-power-on/9046>\
**Category:** Picade\
**Created:** [October 31, 2018, 9:04pm UTC](https://forums.pimoroni.com/t/old-model-does-not-power-on/9046 "2018-10-31T21:04:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jk38](https://avatars.discourse-cdn.com/v4/letter/j/8c91f0/32.png) [@Jk38](https://forums.pimoroni.com/u/Jk38)\
**Post date:** [October 31, 2018, 9:04pm UTC](https://forums.pimoroni.com/t/old-model-does-not-power-on/9046/1 "2018-10-31T21:04:01Z")

</div>

I have the older model that I purchased with BYO screen. I bought a 12.1” Enoyo LCD screen that is 16:9 and HD.  
When I attempted to use the screen’s board, it does not seem to turn on. The Picade board seems to blink and the speakers make a snapping noise. The Raspberry Pi is red and the screen stopped powering on.

Any ideas?

---

<div class="post-metadata">

**Author:** ![gadgetoid](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/gadgetoid/32/13_2.png) [@gadgetoid](https://forums.pimoroni.com/u/gadgetoid)\
**Post date:** [November 1, 2018, 10:39am UTC](https://forums.pimoroni.com/t/old-model-does-not-power-on/9046/2 "2018-11-01T10:39:55Z")

</div>

Can you clarify if the Pi works correctly without the screen in the mix?

How are you powering/connecting the screen? Photos might help.
