# Phat DAC no audio

**URL:** <https://forums.pimoroni.com/t/phat-dac-no-audio/7243>\
**Category:** Support\
**Created:** [February 28, 2018, 5:36pm UTC](https://forums.pimoroni.com/t/phat-dac-no-audio/7243 "2018-02-28T17:36:19Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![deww](https://avatars.discourse-cdn.com/v4/letter/d/ce73a5/32.png) [@deww](https://forums.pimoroni.com/u/deww)\
**Post date:** [March 1, 2018, 5:38am UTC](https://forums.pimoroni.com/t/phat-dac-no-audio/7243/2 "2018-03-01T05:38:43Z")

</div>

I had a phat dac where I can’t get any sound out of either. I was luckily able to exchange for another one and used the “lazy” method of soldering the new one and now the dac I have works great.

> [@pHAT header soldering the lazy way](https://forums.pimoroni.com/t/phat-header-soldering-the-lazy-way/1690):
>
> here are some pics of the pHATs soldered the lazy way. By lazy, I mean that only some of the pins were soldered. For simplicity (or added strength), sometimes I included some pins unnecessary for functionality. a basic rule of thumb, if you’re not sure what is needed, is to solder 6 pins (2x3) at both ends, then check [http://pinout.xyz](http://pinout.xyz) for any additional pins needed for operation. It’s sometimes possible to tell what pins are in use by examining the circuit board (on both sides!), and if you’d …

---

_[View the full topic](https://forums.pimoroni.com/t/phat-dac-no-audio/7243)._
