# Pi Zero measure voltage of a 3S LiPo

**URL:** <https://forums.pimoroni.com/t/pi-zero-measure-voltage-of-a-3s-lipo/3485>\
**Category:** Support\
**Created:** [December 4, 2016, 8:30pm UTC](https://forums.pimoroni.com/t/pi-zero-measure-voltage-of-a-3s-lipo/3485 "2016-12-04T20:30:33Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![tbr](https://avatars.discourse-cdn.com/v4/letter/t/5daacb/32.png) [@tbr](https://forums.pimoroni.com/u/tbr)\
**Post date:** [December 4, 2016, 8:30pm UTC](https://forums.pimoroni.com/t/pi-zero-measure-voltage-of-a-3s-lipo/3485/1 "2016-12-04T20:30:34Z")

</div>

I want to use my PiZero which I’m currently setting up as an ammo counter (and led light controller) for a Nerf Blaster I’m building. This side of things is fine, I have a lovely little OLED screen for the ammo counter.

Usually I wire in a simple LCD voltmeter into the circuit to keep my eye on the voltage on the LiPo so it doesn’t drop too low.

I was wondering if I could get the Pi in on the voltmeter action and get the voltage to display on the screen along with the Ammo count.

From information I’ve gathered it appears I need an ADC and there appears to be the Automation pHat that I believe fits the bill. So my question is, will the automation pHat allow me to measure the voltage from the 3S LiPo most likely with these specs?

Capacity: 1000mAh  
Voltage: 3S1P / 3 Cell / 11.1V  
Discharge: 65C Constant / 130C Burst

And will this still let me use the OLED screen etc?
