# PI4 PICADE 10in, Fanshim with PI4 arcade image config guide **URL:** \ **Category:** Picade\ **Created:** [January 1, 2020, 2:52pm UTC](https://forums.pimoroni.com/t/pi4-picade-10in-fanshim-with-pi4-arcade-image-config-guide/12602 "2020-01-01T14:52:13Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![Fazza](https://avatars.discourse-cdn.com/v4/letter/f/ecae2f/32.png) [@Fazza](https://forums.pimoroni.com/u/Fazza)\ **Post date:** [April 15, 2021, 11:13am UTC](https://forums.pimoroni.com/t/pi4-picade-10in-fanshim-with-pi4-arcade-image-config-guide/12602/4 "2021-04-15T11:13:34Z")
PS. Awesome writeup. I did a similar thing: > [@My fan shim cooling with xhat + fixes to power issue/ reboots on custom images](https://forums.pimoroni.com/t/my-fan-shim-cooling-with-xhat-fixes-to-power-issue-reboots-on-custom-images/16892): > > Hey all. I’ve seen a few posts regarding cooling on picade with the xhat fitted (I have the new 10" version with PI4B). Some are very good but people seem to be hesitant. You shouldnt be. My process was: Buy an extended header (11mm version): Buy a fan shim: Buy a standoff set (I connected two together on each corner): This standoff set may be better although I’d brought the one above: Simply pop off the xhat. Put the fan shim on and then use the extended header and standoff set to r… --- _[View the full topic](https://forums.pimoroni.com/t/pi4-picade-10in-fanshim-with-pi4-arcade-image-config-guide/12602)._