# PiBow B+ Extension layer

**URL:** <https://forums.pimoroni.com/t/pibow-b-extension-layer/102>\
**Category:** Support\
**Created:** [October 10, 2014, 12:46pm UTC](https://forums.pimoroni.com/t/pibow-b-extension-layer/102 "2014-10-10T12:46:05Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![charlesg](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@charlesg](https://forums.pimoroni.com/u/charlesg)\
**Post date:** [October 10, 2014, 12:46pm UTC](https://forums.pimoroni.com/t/pibow-b-extension-layer/102/1 "2014-10-10T12:46:06Z")

</div>

How can I get more extension layers? I have an tall Pi configuration.and need more than the one I got with my case. I have access to a laser cutter so if I could get a .SVG file I could cut my own.

---

<div class="post-metadata">

**Author:** ![Boeeerb](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@Boeeerb](https://forums.pimoroni.com/u/Boeeerb)\
**Post date:** [October 10, 2014, 12:48pm UTC](https://forums.pimoroni.com/t/pibow-b-extension-layer/102/2 "2014-10-10T12:48:37Z")

</div>

Which version is it for?

The original PiBow is available on Thingiverse - [http://www.thingiverse.com/thing:33443](http://www.thingiverse.com/thing:33443)

---

<div class="post-metadata">

**Author:** ![charlesg](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@charlesg](https://forums.pimoroni.com/u/charlesg)\
**Post date:** [October 10, 2014, 1:03pm UTC](https://forums.pimoroni.com/t/pibow-b-extension-layer/102/3 "2014-10-10T13:03:06Z")

</div>

As the title said Pibox B+

---

<div class="post-metadata">

**Author:** ![Boeeerb](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@Boeeerb](https://forums.pimoroni.com/u/Boeeerb)\
**Post date:** [October 10, 2014, 2:47pm UTC](https://forums.pimoroni.com/t/pibow-b-extension-layer/102/4 "2014-10-10T14:47:12Z")

</div>

Ahh my bad, I missed that sorry. You’ll need the actual Pimoroni crew for this one - @jon @gadgetoid ?

---

<div class="post-metadata">

**Author:** ![ConnorPlant](https://avatars.discourse-cdn.com/v4/letter/c/4491bb/32.png) [@ConnorPlant](https://forums.pimoroni.com/u/ConnorPlant)\
**Post date:** [October 16, 2014, 2:29pm UTC](https://forums.pimoroni.com/t/pibow-b-extension-layer/102/5 "2014-10-16T14:29:23Z")

</div>

Hi,

If you get in touch with support we’re able to sell you extra layers.  
£2 for a bottom or top layer  
£1 for middle layers

Thanks,

Connor

---

<div class="post-metadata">

**Author:** ![charlesg](https://avatars.discourse-cdn.com/v4/letter/c/ac8455/32.png) [@charlesg](https://forums.pimoroni.com/u/charlesg)\
**Post date:** [October 16, 2014, 3:53pm UTC](https://forums.pimoroni.com/t/pibow-b-extension-layer/102/6 "2014-10-16T15:53:42Z")

</div>

Do you happen to have a layer that is like the last one before the top (I think it’s #8) but without the notches for the USB ports?

---

<div class="post-metadata">

**Author:** ![ConnorPlant](https://avatars.discourse-cdn.com/v4/letter/c/4491bb/32.png) [@ConnorPlant](https://forums.pimoroni.com/u/ConnorPlant)\
**Post date:** [October 17, 2014, 8:07am UTC](https://forums.pimoroni.com/t/pibow-b-extension-layer/102/7 "2014-10-17T08:07:11Z")

</div>

Hi,

Unfortunately not! The “extension” layer is layer 8 which as you pointed out has the notches in one side for the ports.

Thanks,

Connor