# PIBOW5 -- PIM679

**URL:** <https://forums.pimoroni.com/t/pibow5-pim679/24912>\
**Category:** Support\
**Created:** [June 4, 2024, 9:53am UTC](https://forums.pimoroni.com/t/pibow5-pim679/24912 "2024-06-04T09:53:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jmkiener](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/jmkiener/32/10839_2.png) [@jmkiener](https://forums.pimoroni.com/u/jmkiener)\
**Post date:** [June 4, 2024, 9:53am UTC](https://forums.pimoroni.com/t/pibow5-pim679/24912/1 "2024-06-04T09:53:23Z")

</div>

I bought this case for my RPi 5. The printed instructions do NOT cover the colors of the parts provided. Therefore, I cannot assemble the case.  
Colors of case parts: white (2) and purple (3).

Thanks for your help

---

<div class="post-metadata">

**Author:** ![hel](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/hel/32/6075_2.png) [@hel](https://forums.pimoroni.com/u/hel)\
**Post date:** [June 4, 2024, 10:53am UTC](https://forums.pimoroni.com/t/pibow5-pim679/24912/2 "2024-06-04T10:53:03Z")

</div>

Probably easiest to go off the numbers etched on the layers rather than the colours!

The clear base layer 0 goes on the bottom (with the Pim logo facing down) and then all the other layers go on top, with the numbers stacked on top of each other:

> **[Building your Pibow 5](https://learn.pimoroni.com/article/building-your-pibow-5#stacking-the-bottom-layers-0-1-and-2)**
>
> Keep your precious Pi safe, cool and stylish in a Pibow Coupé 5. – Pimoroni Learning Portal