# Picade PCB connection old controler failed

**URL:** <https://forums.pimoroni.com/t/picade-pcb-connection-old-controler-failed/6384>\
**Category:** Support\
**Created:** [November 19, 2017, 5:55pm UTC](https://forums.pimoroni.com/t/picade-pcb-connection-old-controler-failed/6384 "2017-11-19T17:55:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Charly\_Brr](https://avatars.discourse-cdn.com/v4/letter/c/3ab097/32.png) [@Charly\_Brr](https://forums.pimoroni.com/u/Charly_Brr)\
**Post date:** [November 19, 2017, 5:55pm UTC](https://forums.pimoroni.com/t/picade-pcb-connection-old-controler-failed/6384/1 "2017-11-19T17:55:18Z")

</div>

I tried to build a arcade with my old Joystick connected to a 15 pin gameport ([https://en.wikipedia.org/wiki/Game\_port](https://en.wikipedia.org/wiki/Game_port)). I connected the 4 buttons and the 4 axis of the joystick with the Picade PCB. The Picade is connected USB to an Raspi 3. Did the Joystick need 5 V (I connect pin 1 to GPIO1 ?).  
Problem: Retropie did not detect the Joystick.

 ![IMG_20171119_180803](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/a/ac34dcfcd93a281e876723aa386bc80011b08626.jpg)

---

<div class="post-metadata">

**Author:** ![gadgetoid](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/gadgetoid/32/13_2.png) [@gadgetoid](https://forums.pimoroni.com/u/gadgetoid)\
**Post date:** [November 20, 2017, 10:57am UTC](https://forums.pimoroni.com/t/picade-pcb-connection-old-controler-failed/6384/2 "2017-11-20T10:57:27Z")

</div>

I’ve only a basic understanding of what you’re trying to accomplish here, since I don’t possess any game port joysticks, and have never tried to use them, but is it _just_ the joystick that’s failing to detect? IE: The X/Y axis. Do buttons function as you expect them to?

It looks like the X and Y axis of the Joystick are the center pole of a 100k Ohm variable resistor. Picade should support this with the latest firmware.

---

<div class="post-metadata">

**Author:** ![Charly\_Brr](https://avatars.discourse-cdn.com/v4/letter/c/3ab097/32.png) [@Charly\_Brr](https://forums.pimoroni.com/u/Charly_Brr)\
**Post date:** [November 20, 2017, 6:01pm UTC](https://forums.pimoroni.com/t/picade-pcb-connection-old-controler-failed/6384/3 "2017-11-20T18:01:13Z")

</div>

no XY axis, no buttons  
nothing

---

<div class="post-metadata">

**Author:** ![gadgetoid](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/gadgetoid/32/13_2.png) [@gadgetoid](https://forums.pimoroni.com/u/gadgetoid)\
**Post date:** [November 21, 2017, 12:08pm UTC](https://forums.pimoroni.com/t/picade-pcb-connection-old-controler-failed/6384/4 "2017-11-21T12:08:12Z")

</div>

You can verify that the Picade PCB itself is behaving by using the ends of a male to male jumper jerky to short any one of the button connections to ground.

As for the rest- I don’t know enough about Game Port to be of much use. You should double-check your wiring against a Game Port schematic, and probably liberally employ a multi-meter.

From looking over schematics myself, it appears like at least the buttons should work; but since the Picade PCB was never designed with Game Port in mind, your mileage may vary.
