# Picade X HAT USB-C with Picade 10" inverted screen on RetroPie

**URL:** <https://forums.pimoroni.com/t/picade-x-hat-usb-c-with-picade-10-inverted-screen-on-retropie/15323>\
**Category:** Support\
**Created:** [November 12, 2020, 12:47pm UTC](https://forums.pimoroni.com/t/picade-x-hat-usb-c-with-picade-10-inverted-screen-on-retropie/15323 "2020-11-12T12:47:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rodrijk](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/rodrijk/32/7269_2.png) [@rodrijk](https://forums.pimoroni.com/u/rodrijk)\
**Post date:** [November 12, 2020, 12:47pm UTC](https://forums.pimoroni.com/t/picade-x-hat-usb-c-with-picade-10-inverted-screen-on-retropie/15323/1 "2020-11-12T12:47:03Z")

</div>

Hello folks,

after upgrading my Picade 8" to Picade 10" with the Picade X HAT USB-C and a Raspberry Pi4 I’m unable to use EmulationStation/Retropie, the screen is flipped upon booting and adding command like “display\_hdmi\_rotate=0x20000” solves the issue but works only under the legacy non-GL driver, which prevents Emulationstation from starting, whereas if I enable “dtoverlay=vc4-fkms-v3d”, Emulationstation does then start but the screen won’t flip.

I’m at a loss here, tried multiple combinations and it seems that there is no straightforward way to flip the screen using “display\_hdmi\_rotate” under these GL drivers, I read somewhere that a batch of these Picade X HAT were impacted with this screen inverted issue (\*which I didn’t had before with the Picade 8" set).

Was able to replicate this with both RPi 3b+ and RPi4.

Any suggestions, tips, workarounds, highly welcomed!

---

<div class="post-metadata">

**Author:** ![JKrag](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/jkrag/32/7725_2.png) [@JKrag](https://forums.pimoroni.com/u/JKrag)\
**Post date:** [March 22, 2021, 9:42pm UTC](https://forums.pimoroni.com/t/picade-x-hat-usb-c-with-picade-10-inverted-screen-on-retropie/15323/2 "2021-03-22T21:42:42Z")

</div>

Hi Rodrijk.  
Did you ever get this resolved? We are trying to set up a Picade now for the first time (with a 10" screen) on a Pi4 (Model B Rev 1.1) and have been spending 3 frustrating evenings concluding the exact same as you did above. Either a flipped screen or no emulation station :-(  
We would be grateful for any tips.  
Cheers Jan