# Pico Display library instead of complete firmware?

**URL:** <https://forums.pimoroni.com/t/pico-display-library-instead-of-complete-firmware/19911>\
**Category:** Support\
**Created:** [July 27, 2022, 6:55pm UTC](https://forums.pimoroni.com/t/pico-display-library-instead-of-complete-firmware/19911 "2022-07-27T18:55:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mjm](https://avatars.discourse-cdn.com/v4/letter/m/c6cbf5/32.png) [@mjm](https://forums.pimoroni.com/u/mjm)\
**Post date:** [July 27, 2022, 6:55pm UTC](https://forums.pimoroni.com/t/pico-display-library-instead-of-complete-firmware/19911/1 "2022-07-27T18:55:42Z")

</div>

I’d like to use the Pico Display with some other micropython based firmware (in the current case [Anvil | Anvil on the Pico W](https://anvil.works/pico)). Is that possible?

TIA

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [July 27, 2022, 8:09pm UTC](https://forums.pimoroni.com/t/pico-display-library-instead-of-complete-firmware/19911/2 "2022-07-27T20:09:46Z")

</div>

Should be doable with an st7789 Micro Python library. The LCD Display part anyway. The buttons and RGB LED should be doable too, with a little work.

---

<div class="post-metadata">

**Author:** ![mjm](https://avatars.discourse-cdn.com/v4/letter/m/c6cbf5/32.png) [@mjm](https://forums.pimoroni.com/u/mjm)\
**Post date:** [July 27, 2022, 8:48pm UTC](https://forums.pimoroni.com/t/pico-display-library-instead-of-complete-firmware/19911/3 "2022-07-27T20:48:39Z")

</div>

Thanks for the pointer. Will look into it.