# Pico RGB Keypad Base support in CircuitPython

**URL:** <https://forums.pimoroni.com/t/pico-rgb-keypad-base-support-in-circuitpython/17496>\
**Category:** Support\
**Created:** [July 13, 2021, 10:32pm UTC](https://forums.pimoroni.com/t/pico-rgb-keypad-base-support-in-circuitpython/17496 "2021-07-13T22:32:41Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [August 2, 2021, 7:27am UTC](https://forums.pimoroni.com/t/pico-rgb-keypad-base-support-in-circuitpython/17496/10 "2021-08-02T07:27:02Z")

</div>

My code.py is where the original was, in the root directory.  
Thonny shows the following in Shell  
Adafruit CircuitPython 6.3.0 on 2021-06-01; Raspberry Pi Pico with rp2040  
Its set to CircuitPython Generic.  
ctrl c ctrl d gets me this

```auto
Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.

code.py output:
Traceback (most recent call last):
  File "code.py", line 16, in <module>
  File "/lib/keybow_hardware/pim551.py", line 22, in __init__
RuntimeError: No pull up found on SDA or SCL; check your wiring

Code done running.

Press Ctrl-C to enter the REPL. Use CTRL-D to reload.

```

I’ve only tried the one example.

EDIT: Found this, not sure what it means exactly? 4:30 AM here though and only just got up, lol.  
[Pico RGB Keypad i2c pullup error - Discussion / Raspberry Pi - Pimoroni Buccaneers](https://forums.pimoroni.com/t/pico-rgb-keypad-i2c-pullup-error/16142/12)

---

_[View the full topic](https://forums.pimoroni.com/t/pico-rgb-keypad-base-support-in-circuitpython/17496)._