# Pico RGB Keypad i2c pullup error

**URL:** <https://forums.pimoroni.com/t/pico-rgb-keypad-i2c-pullup-error/16142>\
**Category:** Raspberry Pi\
**Created:** [February 6, 2021, 9:25am UTC](https://forums.pimoroni.com/t/pico-rgb-keypad-i2c-pullup-error/16142 "2021-02-06T09:25:06Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![malick\_e](https://avatars.discourse-cdn.com/v4/letter/m/3ec8ea/32.png) [@malick\_e](https://forums.pimoroni.com/u/malick_e)\
**Post date:** [June 10, 2021, 9:28am UTC](https://forums.pimoroni.com/t/pico-rgb-keypad-i2c-pullup-error/16142/12 "2021-06-10T09:28:01Z")

</div>

I just wanted to chime in and say I’m also facing this issue with the RGB Keypad. I’ve tried it on two different Picos, one with presoldered headers and one that I soldered myself. Both throw this error.

@danhalbert is this something that could be fixed by forking the repo, merging the changes in PR #4488 and rebuilding the UF2 file from that?

---

_[View the full topic](https://forums.pimoroni.com/t/pico-rgb-keypad-i2c-pullup-error/16142)._
