# Pico wireless pack problems

**URL:** <https://forums.pimoroni.com/t/pico-wireless-pack-problems/17201>\
**Category:** Support\
**Created:** [May 24, 2021, 4:44pm UTC](https://forums.pimoroni.com/t/pico-wireless-pack-problems/17201 "2021-05-24T16:44:05Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wolfman66](https://avatars.discourse-cdn.com/v4/letter/w/e5b9ba/32.png) [@Wolfman66](https://forums.pimoroni.com/u/Wolfman66)\
**Post date:** [May 24, 2021, 4:44pm UTC](https://forums.pimoroni.com/t/pico-wireless-pack-problems/17201/1 "2021-05-24T16:44:05Z")

</div>

Hi can anyone help me please, I have purchased the Pico wireless pack and no matter what I do I always receive the following message :

Device is busy or does not respond. Your options:

- wait until it completes current work;
- use Ctrl+C to interrupt current work;
- use Stop/Restart to interrupt more and enter REPL.

I have no other issuses with anything I am trying to do, I have tried three different Picos do you think I may have a faulty unit? Any help would be much appreciated.  
Lee.

---

<div class="post-metadata">

**Author:** ![Shoe](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@Shoe](https://forums.pimoroni.com/u/Shoe)\
**Post date:** [May 24, 2021, 7:18pm UTC](https://forums.pimoroni.com/t/pico-wireless-pack-problems/17201/2 "2021-05-24T19:18:05Z")

</div>

How have you connected the wireless pack to the Pico, and what code are you running? Did you solder the Pico’s headers yourself?

---

<div class="post-metadata">

**Author:** ![Wolfman66](https://avatars.discourse-cdn.com/v4/letter/w/e5b9ba/32.png) [@Wolfman66](https://forums.pimoroni.com/u/Wolfman66)\
**Post date:** [May 24, 2021, 8:33pm UTC](https://forums.pimoroni.com/t/pico-wireless-pack-problems/17201/3 "2021-05-24T20:33:50Z")

</div>

Hi I have attached the pack directly to the Pico as per instructions making sure it was the correct way round, yes I soldered on the headers (I work in an electronics lab so soldering a big part of my daily routine) the code I was using were the examples download from the pimoroni site.

Lee.

---

<div class="post-metadata">

**Author:** ![Shoe](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@Shoe](https://forums.pimoroni.com/u/Shoe)\
**Post date:** [May 25, 2021, 9:22pm UTC](https://forums.pimoroni.com/t/pico-wireless-pack-problems/17201/4 "2021-05-25T21:22:44Z")

</div>

Hmm, I honestly don’t know, I’ve just connected mine the way you’ve described and the MicroPython http rgb example works fine on the latest Micropython firmware (v0.2.1), have you updated that?