# PiGlow loose LED

**URL:** <https://forums.pimoroni.com/t/piglow-loose-led/98>\
**Category:** Support\
**Created:** [October 9, 2014, 1:04pm UTC](https://forums.pimoroni.com/t/piglow-loose-led/98 "2014-10-09T13:04:48Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![lucac81](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/lucac81/32/44_2.png) [@lucac81](https://forums.pimoroni.com/u/lucac81)\
**Post date:** [October 9, 2014, 1:04pm UTC](https://forums.pimoroni.com/t/piglow-loose-led/98/1 "2014-10-09T13:04:48Z")

</div>

Hello,  
been sent here from modmypi support.  
I’ve bought a PiGlow a couple of week ago, I’ve noticed that an orange led it’s not working, but after a better inspection I found that if I press the led onto the board it starts working, could it be a soldering problem? it’s something that can bel solved by a beginner in soldering?

---

<div class="post-metadata">

**Author:** ![ConnorPlant](https://avatars.discourse-cdn.com/v4/letter/c/4491bb/32.png) [@ConnorPlant](https://forums.pimoroni.com/u/ConnorPlant)\
**Post date:** [October 16, 2014, 2:31pm UTC](https://forums.pimoroni.com/t/piglow-loose-led/98/2 "2014-10-16T14:31:59Z")

</div>

Hi,

Sounds like it could be badly attached.  
If you get in touch with support, we’ll get you another sent out. :)

Connor

---

<div class="post-metadata">

**Author:** ![lucac81](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/lucac81/32/44_2.png) [@lucac81](https://forums.pimoroni.com/u/lucac81)\
**Post date:** [October 17, 2014, 11:48am UTC](https://forums.pimoroni.com/t/piglow-loose-led/98/3 "2014-10-17T11:48:52Z")

</div>

That’s very good to hear, but you’ll send me a replacement even if I have bought it on [modmypi.com](http://modmypi.com)? (they sent me here to ask for support) in that case I’ll do it ASAP where do I can get in touch with support?  
In the other case I’ll buy one another :P  
Thanks

---

<div class="post-metadata">

**Author:** ![ConnorPlant](https://avatars.discourse-cdn.com/v4/letter/c/4491bb/32.png) [@ConnorPlant](https://forums.pimoroni.com/u/ConnorPlant)\
**Post date:** [October 17, 2014, 2:15pm UTC](https://forums.pimoroni.com/t/piglow-loose-led/98/4 "2014-10-17T14:15:30Z")

</div>

Hi,

Yeah if it’s not working as it should, we’ll send out a new one.  
If you email us at [support@pimoroni.com](mailto:support@pimoroni.com) we’ll take it from there. :)

Thanks,

Connor
