# PIM412 product description error

**URL:** <https://forums.pimoroni.com/t/pim412-product-description-error/14960>\
**Category:** Support\
**Created:** [September 20, 2020, 8:15pm UTC](https://forums.pimoroni.com/t/pim412-product-description-error/14960 "2020-09-20T20:15:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jackjameshoward](https://avatars.discourse-cdn.com/v4/letter/j/8797f3/32.png) [@jackjameshoward](https://forums.pimoroni.com/u/jackjameshoward)\
**Post date:** [September 20, 2020, 8:15pm UTC](https://forums.pimoroni.com/t/pim412-product-description-error/14960/1 "2020-09-20T20:15:55Z")

</div>

On the product description for [PIM412](https://shop.pimoroni.com/products/as7262-6-channel-spectral-sensor-spectrometer-breakout), there’s an error in the pin numbering. It reads “… pop it straight onto the bottom left 5 pins on your Raspberry Pi’s GPIO header (pins 1, 3, 5, **6** 9).”  
I think it should be (pins 1, 3, 5, **7** 9).  
Just thought it could catch somebody one day.

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [September 20, 2020, 9:11pm UTC](https://forums.pimoroni.com/t/pim412-product-description-error/14960/2 "2020-09-20T21:11:29Z")

</div>

Somebody made a typo, further on it says

Raspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)

There is a contact us link on the shop page you could use to e-mail them so they can fix it. Shouldn’t be a big issue. It will be connected to pin 7 if you use the breakout garden hat or connect it to the GPIO with the female header.