# Pirate Radio newinstall with raspbian 11-29 and oneline installer
**URL:** https://forums.pimoroni.com/t/pirate-radio-newinstall-with-raspbian-11-29-and-oneline-installer/6547
**Category:** Support
**Created:** [December 6, 2017, 12:48pm UTC](https://forums.pimoroni.com/t/pirate-radio-newinstall-with-raspbian-11-29-and-oneline-installer/6547 "2017-12-06T12:48:39Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@calleblyh](https://forums.pimoroni.com/u/calleblyh)
#### Post date: [December 6, 2017, 12:48pm UTC](https://forums.pimoroni.com/t/pirate-radio-newinstall-with-raspbian-11-29-and-oneline-installer/6547/1 "2017-12-06T12:48:39Z")
Hi,
I made a new install using RaspBian-11-29 and used an apparently updated oneline installer for vlc-radio.
It works (both Full and Lite versions), but I cannot get it to play my own internet radio streams. It seems the filestructure has changed from my first installation some three-four weeks ago, and I cannot locate the right default.m3u file containing the playlist. Where should I search ? I found one default.m3u in /Pimoroni/phatbeat/projects/vlc-radio/vlcd/etc/vlcd containng a playlist, I edited that to suit my radiostreams but after reboot the device anyhow doesnt play according to my own playlist. What to do ?
Thanks in advance
calleblyh
---
### Author:  [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)
#### Post date: [December 6, 2017, 1:57pm UTC](https://forums.pimoroni.com/t/pirate-radio-newinstall-with-raspbian-11-29-and-oneline-installer/6547/2 "2017-12-06T13:57:27Z")
What I’ve been doing is putting my SD card in a reader and plugging it into my Windows PC. Then I copy my playlist.m3u to the root of the partition that shows up. Boot I think. Then when I boot up my pi that playlist gets moved to and replaces the default playlist. I know where the actual file is, but would have to boot up that Pi with a monitor to get the path correct to post here.
---
### Author:  [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)
#### Post date: [December 6, 2017, 2:00pm UTC](https://forums.pimoroni.com/t/pirate-radio-newinstall-with-raspbian-11-29-and-oneline-installer/6547/3 "2017-12-06T14:00:30Z")
Do you still get the pop sounds when changing channels? VU meter working OK? I ask because I’m still running Jessie on my Pirate Radio. If the pops are cleaned up I’ll redo it with Stretch.
---
### Author:  [@calleblyh](https://forums.pimoroni.com/u/calleblyh)
#### Post date: [December 6, 2017, 6:00pm UTC](https://forums.pimoroni.com/t/pirate-radio-newinstall-with-raspbian-11-29-and-oneline-installer/6547/4 "2017-12-06T18:00:25Z")
Thanks for returning. Still no success getting my own playlist to work. VU meter working after checking advices according to [https://gist.github.com/Gadgetoid/3301cec3e47495e75b31d3120d8f17d9](https://gist.github.com/Gadgetoid/3301cec3e47495e75b31d3120d8f17d9)
There is some cracklin towords the end of the boot process. After a very short test changing channels I have experienced pops and cracks
All for now, continuing tomorrow
---
### Author:  [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)
#### Post date: [December 6, 2017, 7:53pm UTC](https://forums.pimoroni.com/t/pirate-radio-newinstall-with-raspbian-11-29-and-oneline-installer/6547/5 "2017-12-06T19:53:53Z")
Try sudo nano /etc/vlcd/default.m3u
---
### Author:  [@calleblyh](https://forums.pimoroni.com/u/calleblyh)
#### Post date: [December 6, 2017, 8:36pm UTC](https://forums.pimoroni.com/t/pirate-radio-newinstall-with-raspbian-11-29-and-oneline-installer/6547/6 "2017-12-06T20:36:38Z")
Thank you very much. That made my day.
---
### Author:  [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)
#### Post date: [December 6, 2017, 10:57pm UTC](https://forums.pimoroni.com/t/pirate-radio-newinstall-with-raspbian-11-29-and-oneline-installer/6547/7 "2017-12-06T22:57:54Z")
Good stuff, enjoy your tunes.