# Pitft case for raspberry pi 3 n pitft 3.5

**URL:** <https://forums.pimoroni.com/t/pitft-case-for-raspberry-pi-3-n-pitft-3-5/4669>\
**Category:** Support\
**Created:** [April 28, 2017, 10:22am UTC](https://forums.pimoroni.com/t/pitft-case-for-raspberry-pi-3-n-pitft-3-5/4669 "2017-04-28T10:22:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kadrong](https://avatars.discourse-cdn.com/v4/letter/k/e36b37/32.png) [@Kadrong](https://forums.pimoroni.com/u/Kadrong)\
**Post date:** [April 28, 2017, 10:22am UTC](https://forums.pimoroni.com/t/pitft-case-for-raspberry-pi-3-n-pitft-3-5/4669/1 "2017-04-28T10:22:45Z")

</div>

I purchased a case recently and got a bunch of weird stuff and no instructions on how to assemble them… can someone help please

 ![](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/4/452d46507858a86555a3afe5cc2daed990b00285.jpg)

---

<div class="post-metadata">

**Author:** ![pi2003](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/pi2003/32/1613_2.png) [@pi2003](https://forums.pimoroni.com/u/pi2003)\
**Post date:** [April 28, 2017, 3:23pm UTC](https://forums.pimoroni.com/t/pitft-case-for-raspberry-pi-3-n-pitft-3-5/4669/2 "2017-04-28T15:23:41Z")

</div>

The acrylic should have numbers in the corner 0 being the base. You can then work you way up and push in the screws and tighten with nuts

---

<div class="post-metadata">

**Author:** ![pi2003](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/pi2003/32/1613_2.png) [@pi2003](https://forums.pimoroni.com/u/pi2003)\
**Post date:** [April 28, 2017, 3:27pm UTC](https://forums.pimoroni.com/t/pitft-case-for-raspberry-pi-3-n-pitft-3-5/4669/3 "2017-04-28T15:27:20Z")

</div>

[https://learn.pimoroni.com/tutorial/sandyj/building-your-pibow](https://learn.pimoroni.com/tutorial/sandyj/building-your-pibow)

This might help you.