# Plasma 2350

**URL:** <https://forums.pimoroni.com/t/plasma-2350/26657>\
**Category:** Support\
**Created:** [November 28, 2024, 11:27am UTC](https://forums.pimoroni.com/t/plasma-2350/26657 "2024-11-28T11:27:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mrcrookes](https://avatars.discourse-cdn.com/v4/letter/m/3bc359/32.png) [@mrcrookes](https://forums.pimoroni.com/u/mrcrookes)\
**Post date:** [November 28, 2024, 11:27am UTC](https://forums.pimoroni.com/t/plasma-2350/26657/1 "2024-11-28T11:27:47Z")

</div>

Hi,

Sorry for the stupid question.

I’ve installed the .uf2 for my plasma 2350 from here:

> **[GitHub - pimoroni/pimoroni-pico-rp2350: MicroPython builds for Pimoroni Pico 2 / RP2350...](https://github.com/pimoroni/pimoroni-pico-rp2350)**
>
> MicroPython builds for Pimoroni Pico 2 / RP2350 boards.

I was able to install Thonny and click on the bottom right hand corner of to select ‘MicroPython (Raspberry Pi Pico) - /dev/ttyACM0)’. There is also an option for - ‘MicroPython (RP2040) - /dev/ttyACM0)’

I can run the examples and they work well but how do I save the code onto the board and get it to run when I plug it into a USB-C plug?

I tried saving the file onto the board as code.py but this didn’t seem to work.

I’m running Ubuntu on the connected PC.

---

<div class="post-metadata">

**Author:** ![hel](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/hel/32/6075_2.png) [@hel](https://forums.pimoroni.com/u/hel)\
**Post date:** [November 28, 2024, 11:30am UTC](https://forums.pimoroni.com/t/plasma-2350/26657/2 "2024-11-28T11:30:54Z")

</div>

You need to save your code to your Pico as `main.py` if you want it to run as default :)