# Python 3 Install broken **URL:** \ **Category:** Support\ **Created:** [December 20, 2024, 8:45pm UTC](https://forums.pimoroni.com/t/python-3-install-broken/26837 "2024-12-20T20:45:01Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![rothian717](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@rothian717](https://forums.pimoroni.com/u/rothian717)\ **Post date:** [December 20, 2024, 8:45pm UTC](https://forums.pimoroni.com/t/python-3-install-broken/26837/1 "2024-12-20T20:45:01Z")
Woke up today trying to build this > **[GitHub - dylski/PaperPiAI: Raspberry Pi Zero powered AI-generated e-ink...](https://github.com/dylski/PaperPiAI)** > > Raspberry Pi Zero powered AI-generated e-ink picture frame. I cannot for the life of me get even INKY impression 7.3 to work. I get a lot of font errors when doing the full install for python 3/inky. once everything is complete I get the error Woah there, some pins we need are in use! ⚠️ Chip Select: (line 8, SPI\_CE0\_N) currently claimed by spi-bcm2835 after adding this to the config.txt which i edit from notepad. This requires the addition of `dtoverlay=spi0-0cs` to `/boot/firmware/config.txt` . all my google searches do not give me an answer on how to solve this ---
**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\ **Post date:** [December 21, 2024, 8:33am UTC](https://forums.pimoroni.com/t/python-3-install-broken/26837/2 "2024-12-21T08:33:52Z")
Have you tried with an older PiOS version? I suggest something like 2024-07-04. ---
**Author:** ![rothian717](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@rothian717](https://forums.pimoroni.com/u/rothian717)\ **Post date:** [December 23, 2024, 5:54am UTC](https://forums.pimoroni.com/t/python-3-install-broken/26837/4 "2024-12-23T05:54:30Z")
on the 10/22/24 version of bullseye. i cant get past this error.