# Raspberry pi debug probe cables

**URL:** <https://forums.pimoroni.com/t/raspberry-pi-debug-probe-cables/25141>\
**Category:** Raspberry Pi\
**Created:** [July 22, 2024, 2:18pm UTC](https://forums.pimoroni.com/t/raspberry-pi-debug-probe-cables/25141 "2024-07-22T14:18:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![rde1](https://avatars.discourse-cdn.com/v4/letter/r/85f322/32.png) [@rde1](https://forums.pimoroni.com/u/rde1)\
**Post date:** [July 22, 2024, 2:18pm UTC](https://forums.pimoroni.com/t/raspberry-pi-debug-probe-cables/25141/1 "2024-07-22T14:18:36Z")

</div>

I’m trying to find spare jst/jst 3 wire cables for the Raspberry pi debug probe. You stock JST-SH to dupont male/female but I can’t find jst-jst cables. Do you stock these cables? If not can you add them? Or would the grow sensor cables work?

---

<div class="post-metadata">

**Author:** ![fishgotnosole](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/fishgotnosole/32/7883_2.png) [@fishgotnosole](https://forums.pimoroni.com/u/fishgotnosole)\
**Post date:** [July 22, 2024, 9:34pm UTC](https://forums.pimoroni.com/t/raspberry-pi-debug-probe-cables/25141/2 "2024-07-22T21:34:54Z")

</div>

I saw [these](https://thepihut.com/products/jst-ph-3-pin-plug-plug-cable-100mm-long) on the Pi Hut, but please don’t just take my word for it. They may not be the correct thing?

---

<div class="post-metadata">

**Author:** ![rde1](https://avatars.discourse-cdn.com/v4/letter/r/85f322/32.png) [@rde1](https://forums.pimoroni.com/u/rde1)\
**Post date:** [July 22, 2024, 10:01pm UTC](https://forums.pimoroni.com/t/raspberry-pi-debug-probe-cables/25141/3 "2024-07-22T22:01:04Z")

</div>

Those seem to be JSH-PH connectors, a slightly different pitch.

---

<div class="post-metadata">

**Author:** ![hel](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/hel/32/6075_2.png) [@hel](https://forums.pimoroni.com/u/hel)\
**Post date:** [July 23, 2024, 10:44am UTC](https://forums.pimoroni.com/t/raspberry-pi-debug-probe-cables/25141/4 "2024-07-23T10:44:00Z")

</div>

[Grow sensor cables](https://shop.pimoroni.com/products/grow-moisture-sensor-cables) are JST-SH, but they have same side connectors so I think you’d need to swap one of the connectors around if you wanted the same pinout at both ends (this is doable with a magnifier and some kind of fine pointy tool).