# Scroll pHAT HD - newb questions

**URL:** <https://forums.pimoroni.com/t/scroll-phat-hd-newb-questions/14063>\
**Category:** Support\
**Created:** [May 28, 2020, 9:17pm UTC](https://forums.pimoroni.com/t/scroll-phat-hd-newb-questions/14063 "2020-05-28T21:17:09Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![dc2447](https://avatars.discourse-cdn.com/v4/letter/d/7cd45c/32.png) [@dc2447](https://forums.pimoroni.com/u/dc2447)\
**Post date:** [May 28, 2020, 9:17pm UTC](https://forums.pimoroni.com/t/scroll-phat-hd-newb-questions/14063/1 "2020-05-28T21:17:09Z")

</div>

Scroll pHAT HD

Site says it supports all 40pin Raspberry Pis - I have some old model B rev 2 boards

Will the Scroll pHAT HD sit flush on the board or will the audio jack be in the way?

Is there cases that will fit the Scroll pHAT on the model B rev2 boards?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [May 28, 2020, 9:43pm UTC](https://forums.pimoroni.com/t/scroll-phat-hd-newb-questions/14063/2 "2020-05-28T21:43:33Z")

</div>

Looking at the pinout, I would think it will work on an older 26 pin GPIO Pi.

> **[Scroll pHAT HD at Raspberry Pi GPIO Pinout](https://pinout.xyz/pinout/scroll_phat_hd)**
>
> A 17 x 7 LED matrix

  
If your worried about clearance issues you could use one of these to raise it up.  

> **[Booster Header – Pimoroni Store](https://shop.pimoroni.com/products/booster-header)**
>
> These headers will give your HAT or pHAT a real lift!

  
and these should work with that extra height.  

> **[Extended Pi Standoffs – Pimoroni Store](https://shop.pimoroni.com/products/extended-pi-standoffs)**
>
> Need a little extra height for your project? These extended standoffs give the extra clearance you need!

  
But they appear to be missing some nuts for the threaded ends? You could just screw 4 of the stock standoffs to the ends and use them as a stand / feet.

---

<div class="post-metadata">

**Author:** ![dc2447](https://avatars.discourse-cdn.com/v4/letter/d/7cd45c/32.png) [@dc2447](https://forums.pimoroni.com/u/dc2447)\
**Post date:** [May 29, 2020, 12:00pm UTC](https://forums.pimoroni.com/t/scroll-phat-hd-newb-questions/14063/3 "2020-05-29T12:00:23Z")

</div>

> [@alphanumeric](#):
>
> and these should work with that extra height.

Thanks - will these work with the 26pin header?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [May 29, 2020, 12:04pm UTC](https://forums.pimoroni.com/t/scroll-phat-hd-newb-questions/14063/4 "2020-05-29T12:04:08Z")

</div>

One will line up for sure, not sure about the others though. I’m so used to all the 40 pin Pi’s having the mounting holes in the same place I forgot that the older ones have things shifted around a bit. Sorry about that.

---

<div class="post-metadata">

**Author:** ![dc2447](https://avatars.discourse-cdn.com/v4/letter/d/7cd45c/32.png) [@dc2447](https://forums.pimoroni.com/u/dc2447)\
**Post date:** [May 29, 2020, 12:15pm UTC](https://forums.pimoroni.com/t/scroll-phat-hd-newb-questions/14063/5 "2020-05-29T12:15:39Z")

</div>

Thanks, will try regardless.