# Scroll Phat original

**URL:** <https://forums.pimoroni.com/t/scroll-phat-original/8130>\
**Category:** Support\
**Created:** [July 13, 2018, 5:05am UTC](https://forums.pimoroni.com/t/scroll-phat-original/8130 "2018-07-13T05:05:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![py-my](https://avatars.discourse-cdn.com/v4/letter/p/eb8c5e/32.png) [@py-my](https://forums.pimoroni.com/u/py-my)\
**Post date:** [July 13, 2018, 5:05am UTC](https://forums.pimoroni.com/t/scroll-phat-original/8130/1 "2018-07-13T05:05:18Z")

</div>

Hello!

Im just attempting to get going on the Scroll Phat that I was given, it looks so cool.

One problem after using the dashboard I attempted to run the first script `test-all.py`, but this fails with an error of:

[Errno 121] Remote I/O error.

Any help would be much appreciated! I would hate for this gift to go to waste.

–Cheers!

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [July 13, 2018, 9:04am UTC](https://forums.pimoroni.com/t/scroll-phat-original/8130/2 "2018-07-13T09:04:35Z")

</div>

Sounds like an i2c error. It should show up as 60 if you run i2cdetect -y 1 I believe its  
`sudo i2cdetect -y 1`  
How have you got it connected, female header soldered on the scroll pHat?  
Pinout is here, [https://pinout.xyz/pinout/scroll\_phat#](https://pinout.xyz/pinout/scroll_phat#)