# \[SOLVED\] Cannot get display working on pico explorer base

**URL:** <https://forums.pimoroni.com/t/solved-cannot-get-display-working-on-pico-explorer-base/26581>\
**Category:** Support\
**Created:** [November 19, 2024, 8:46am UTC](https://forums.pimoroni.com/t/solved-cannot-get-display-working-on-pico-explorer-base/26581 "2024-11-19T08:46:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chris\_S](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/chris_s/32/11165_2.png) [@Chris\_S](https://forums.pimoroni.com/u/Chris_S)\
**Post date:** [November 19, 2024, 8:46am UTC](https://forums.pimoroni.com/t/solved-cannot-get-display-working-on-pico-explorer-base/26581/1 "2024-11-19T08:46:48Z")

</div>

Hi, newbie to pico here so apologies as I expect I’m missing something obvious.

I have a pico and explorer base, have soldered it up, added the uf2 image, installed thonny, and am trying out the examples in pimoroni’s [github](https://github.com/pimoroni/pimoroni-pico/tree/main/micropython/examples/pico_explorer).

So far it seems that just the display is not working:

- I have a green light at the edge of the display section when I plug in power.
- When I run something like rainbow.py nothing happens on the display, but putting some prints in the code I can see the loop is running
- When I run button.py again nothing on the display, but by using prints I can see that each button press is being detected just fine
- If I call `display.get_bounds()` then I get 240,240 returned which I would assume is correct
- [Edit]: the speaker and thermometer both work too, it’s just the display as far as I can tell

Any thoughts on what I’m missing in order get things displaying? Thanks in advance!

---

<div class="post-metadata">

**Author:** ![Chris\_S](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/chris_s/32/11165_2.png) [@Chris\_S](https://forums.pimoroni.com/u/Chris_S)\
**Post date:** [November 19, 2024, 9:26pm UTC](https://forums.pimoroni.com/t/solved-cannot-get-display-working-on-pico-explorer-base/26581/2 "2024-11-19T21:26:52Z")

</div>

Just updating that I’ve found the issue: studying the pin layout I noticed some poor soldering on the LCD pins. It’s now all working correctly :-)
