# Sunrise alarm and HA voise assistant

**URL:** <https://forums.pimoroni.com/t/sunrise-alarm-and-ha-voise-assistant/29084>\
**Category:** Support\
**Created:** [September 6, 2026, 4:15pm UTC](https://forums.pimoroni.com/t/sunrise-alarm-and-ha-voise-assistant/29084 "2026-09-06T16:15:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![niall.marsay](https://avatars.discourse-cdn.com/v4/letter/n/b19c9b/32.png) [@niall.marsay](https://forums.pimoroni.com/u/niall.marsay)\
**Post date:** [September 6, 2026, 4:15pm UTC](https://forums.pimoroni.com/t/sunrise-alarm-and-ha-voise-assistant/29084/1 "2026-09-06T16:15:49Z")

</div>

Hi There

I’d like to make my own sunrise alarm using the IKEA tarnaby lamp. that can be controled by home assistant and also be a home assistant voice assistant as well.

It uses an E14 bulb and has a physical twist knob that controls power and dimming.

There’s a decent amount of space in the base which could fit a Pi zero etc.

Does anyone have any idea what hardware I should buy to do this and what software avenues I should go down?  
I’ve used diet pi on a zero to create a VPN tunnel before but nothing else.

> **[TÄRNABY black, anthracite, table lamp](https://www.ikea.com/gb/en/p/taernaby-table-lamp-dimmable-anthracite-20323891/)**
>
> A table lamp in anthracite black inspired by kerosene lamps. Features a dimmable bulb that mimics a live flame and offers soft, warm lighting.