# Tiny2350 SWD

**URL:** <https://forums.pimoroni.com/t/tiny2350-swd/27537>\
**Category:** Support\
**Created:** [March 24, 2025, 9:55pm UTC](https://forums.pimoroni.com/t/tiny2350-swd/27537 "2025-03-24T21:55:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![eletvon](https://avatars.discourse-cdn.com/v4/letter/e/ccd318/32.png) [@eletvon](https://forums.pimoroni.com/u/eletvon)\
**Post date:** [March 24, 2025, 9:55pm UTC](https://forums.pimoroni.com/t/tiny2350-swd/27537/1 "2025-03-24T21:55:39Z")

</div>

Does Tiny2350 have an equivalent to the three SWD pins on the bottom edge of the Pico 2? I gather these are used for debug probe purposes as described here:  
[https://www.raspberrypi.com/documentation/microcontrollers/debug-probe.html](https://www.raspberrypi.com/documentation/microcontrollers/debug-probe.html)

---

<div class="post-metadata">

**Author:** ![Shoe](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@Shoe](https://forums.pimoroni.com/u/Shoe)\
**Post date:** [March 24, 2025, 10:13pm UTC](https://forums.pimoroni.com/t/tiny2350-swd/27537/2 "2025-03-24T22:13:52Z")

</div>

Looking at the schematic on the store page, those pins don’t seem to be broken out on the Tiny 2350.