1.12" Mono OLED Breakout 128x128. I’ve had this board for 2 years and still cannot get it to work. I’m using a Pi 3 with a new SD card and tried to install the drivers from the current script on the website. It down loads the luma.core and then falls over with luma.core requires Python ‘>3.5, <4’ …

i2c or SPI version? Did you try the For Python3 installation, substitute the following in the instructions below. pip ⇒ pip3 , python ⇒ python3 , python-dev ⇒ python3-dev , python-pip ⇒ python3-pip .

Thanks, using pip3 got the drivers to finish but trying to run the setup and any of the other examples just gives a load of red error messages - so still not working properly. This is continuing to be a very disappointing experience. Normally, with a Pimoroni board you click on the link, it install…

i2c version or SPI version? This is how it went for me with my color SPI LCD, might help. I did finally get it working. [image] 1.3 color tft LCD on btreakout garden pHat, SPI i2c Support I’m trying to get my 1.3" SPI Colour LCD (240x240) Breakout working with a Brea…

I installed idle3 and have managed to get “Hello, World” on the screen. Have you found a list of the graphic primitives anywhere with the syntax? Things like daw a single dot, line, rectangle, polygon? This is hard work without easy to follow documentation. I’ve been using SSD1306 128x64 displays …

I haven’t done anything with mine after making sure it worked. I have some stuff on order that I’m waiting on before going any further. PIL / Pillow is what is used to show graphics etc on mine (ST7789), as far as i know anyway. Yours I believe uses Luma?

I also prefer Idle over thorny etc. You may have better luck running your files from command line though. python3 bounce.py --display sh1106 --height 128 --rotate 2 --interface… Also have a look see at this https://luma-oled.readthedocs.io/en/latest/api-documentation.html and https://luma-oled.…

I’m having trouble getting one of these 128x128 OLED displays to work (SPI version). Using the exampled I can get an image but it is very corrupt. I notice that the recommended Luma library supports the SH1106 chip but that the board has a SH1107 driver chip, which apparently has a different initi…

I’ve spent a great deal of time lately playing with various displays: OLEDs, TFTs with and without touch screens etc. I’ve been doing this mainly with Arduino IDE. For a 1.3” OLED SH1106 128x64 I had to use the library “U8g2” made by “oliver”. This drives a great many different boards and you may fi…

I haven’t done anything with OLEDS. Just the color LCD breakouts. The 1.3 and 0.96.

1.12" Mono OLED Breakout 128x128

Support

Tonygo2 May 31, 2020, 6:40pm 8

Thanks for these. I’ve managed to get the Conway’s lIfe and the basics shapes scripts working. I’ll write my own guide in the morning. Best of luck with PILLOW.

Topic		Replies	Views
Insane struggle setting up 1.12" mono oled (SPI) Support	18	1774	May 15, 2020
Pico w breakout garden with OLED display via SPI Support	8	414	March 19, 2024
1.12" Mono OLED i2c Breakout – no Micro Python driver? Support	5	349	October 7, 2023
Breakut Garden 1.12 mono oled Support	7	951	March 12, 2020
1.12" oled Support	5	854	May 24, 2021

1.12" Mono OLED Breakout 128x128

Related topics