<a name="p-65093-greetings-i-recently-purchased-a-pico-enviro-pack-and-i-am-trying-to-use-the-enviro_all_mqttpy-program-to-sensor-data-to-adafruit-io-data-loggingdisplay-site-i-cannot-seem-to-get-the-data-to-display-on-the-adafruit-site-has-anyone-out-there-tried-to-do-this-and-be-able-to-assist-me-1" class="anchor" href="#p-65093-greetings-i-recently-purchased-a-pico-enviro-pack-and-i-am-trying-to-use-the-enviro_all_mqttpy-program-to-sensor-data-to-adafruit-io-data-loggingdisplay-site-i-cannot-seem-to-get-the-data-to-display-on-the-adafruit-site-has-anyone-out-there-tried-to-do-this-and-be-able-to-assist-me-1" aria-label="Heading link"> Greetings" I recently purchased a Pico Enviro + Pack and I am trying to use the Enviro_all_mqtt.py program to sensor data to Adafruit IO data logging/display site. I cannot seem to get the data to display on the Adafruit site. Has anyone out there tried to do this and be able to assist me? In the e…

Hello! There’s some documentation here about what settings you need to post MQTT data into Adafruit.io here: Adafruit IO API Reference . It’s quite particular about formatting, so you’d probably also need to tweak the example to format your MQTT data in the way it expects - Adafruit IO API Reference …

Hel Thanks for the info. I have some addition questions. On the Pico enviro + pack, when I send using enviro_all_mqtt program developed by Pimoroni, I get an IP address, then it says wait minute. The LED above the display lights up red. Is this an error with the program? If so, the program must…

Hel: I ran the “[enviroplus_into_adafruitio.py” mentioned in you post to me. I get an error message Error: 401 b’Unauthorized’ , at the same time the LED above the LCD displays in red while the program runs. Should the LED display red? What does the error mean? I am so frustrated with this pro…

Hey hey I wrote (and tested!) the MQTT example, but I wrote it for the purposes of sending data into Home Assistant, not Adafruit.io . MQTT is just a protocol for sending messages, different services will require data formatted in different ways to be able to accept it. The MQTT API documentation I …

If you’re using a free Adafruit.io account you might want to grab the updated code from Enviro + into adafruit.io · GitHub - I’ve reduced the number of feeds it sends as it was exceeding the data limits and giving me an ‘unprocessable entity’ error.

Greeting Hel: I loaded your latest enviroplus_into_adafruitio.py into the Pico enviro + Pack. With the addition support packages and I was successful in sending data to Adafruit IO. - yea A few questions I now need to be able to display all 9 data items at once - is that possible? In your progr…

Hooray! Glad that helped :) I now need to be able to display all 9 data items at once - is that possible? You mean display your data on Adafruit.io ? You can do that by setting up a dashboard - there’s some instructions on how to do that in the Enviro tutorial (scroll down to the section on ‘vie…

Hel Thanks so much for your help and insight.ltom

Hel I am getting more familiar with the Pico enviro + pack and data sending. I have a question – I got everything working pretty well now, i want to make the enviroplus_into_adafruitio.py program start automatically from a external battery on startup of the pico enviro+ pack. I changed the program…

Yep, saving your program as main.py should make it run automatically. Some USB battery packs don’t start supplying power automatically when you plug something in, and some won’t supply power if the current draw isn’t high enough - might be worth checking if that’s what is happening?

Pico Enviro + Pack MQTT help

Support

Sonic1 July 9, 2025, 12:30pm 13

Do i need to load any packages?

Topic		Replies	Views
Pico Enviro + Question Support	0	228	September 12, 2022
Enviro Indoor and Adafruit.IO Support	1	213	June 23, 2023
Pico Enviro + mqtt error Support	0	259	September 18, 2022
Enviro Weather data transfer New Products	4	834	May 2, 2023
Enviro Weather Pico W Support	3	412	December 22, 2022

Pico Enviro + Pack MQTT help

Related topics