Having such a hard time with this screen… after almost 2 months finally got the screen to stay rotated horizontally and not freeze or lock up . Now the touch calibration have the axis swapped on y and x and every configuration i have attempted will only change 1 of the them not both . After a lot of useless restarting and hours on end this is the configuration i have now that allows the screen to be horizontal and only 1 axis of sliding your finger up and down works. going right to left is reversed dtoverlay=hyperpixel4:,touchscreen-swapped-x-y=1,touchscreen-inverted-x=1 display_rotate=3 swapaxis=1 display_lcd_rotate=3 gpio=0-25=a2 enable_dpi_lcd=1 dpi_group=2 dpi_mode=87 dpi_output_format=0x7f216 dpi_timings=480 0 10 16 59 800 0 15 113 15 0 0 0 60 0 32000000 6

I found this, might help [image] Hyperpixel 4.0 Touchscreen Rotate with Display Support I’m resting my Pi with the Hyperpixel 4.0 on it’s side so that the PSU and HDMI ports face upwards. The original installation instructions end up with the display upside down, so to fix this I changed display_rotate=3 in /boot/config.txt to display_rotate=1. Unfortunately the touchscreen sensor hasn’t rotated with the display, so the mouse appears in the opposite corner to where I touch. How do I fix this please?

HyperPixel4 the worst

Support

alphanumeric January 19, 2020, 10:00am 2

I found this, might help

Topic		Replies	Views
Hyperpixel 4 with touch - headache with touch! Support	7	2282	July 12, 2019
Hyperpixel 4.0 Touchscreen Rotate with Display Support	19	11545	January 31, 2021
HyperPixel Touchscreen malfunctions Support	10	1064	May 6, 2020
Hyperpixel 4 touchscreen rotation in raspberry pi 4 Support	6	3994	May 29, 2021
HyperPixel 4 touch orientation/calibration issue Support	6	3062	September 11, 2019

HyperPixel4 the worst

Related topics