Hi how you all doing? First post, actually second. Just deleted my first post. Attached is my Shell (pico uf2 1.19) output, returned error when import 240x240 lcd. Any pointers? Thank you all in advance. Tony MicroPython v1.19 on 2022-07-04; Raspberry Pi Pico with RP2040 Type "help()" for more…

If you reduce the size of the text, you can reduce the spacing between lines of text to get more lines of text. That or take out the min max temperature. The last number in the display text line is the text size. Change the 5 to 4 and it gets smaller etc. The first two numbers are the position.

Actually, you should have some empty space at the bottom, where I have my battery state displayed.

@alphanumeric Got it, thanks for the pointers. I will dance with them this time. The min max temp is a keeper. I will probably let go of the barometer and descriptions, leaving only fixed color numbers and symbols. Enlarge them to fit the screen, and the cherry on top for me would be a JPG backgro…

You don’t need all 7 of them, I’ve been dropping the wordwrap. If you leave some out you do need to specify what the next one is though, for example. display.text(Hello, 0, 10, 240, 5) becomes display.text(Hello, 0, 10, scale = 5) Both will work. eventually I’m going to try and migrate all my co…

pimoroni-pico/micropython/modules/picographics at main · pimoroni/pimoroni-pico - Text main/micropython/modules/picographics Libraries and examples to support Pimoroni Pico add-ons in C++ and MicroPython. Text Changing The Font Change the font: display.se…

Have alook in this thread, @Tonygo2 is the one to ask. [image] Pico display github module reference Support The documentation and examples will catch up. Might take a little time, but I’m sure it will get done. That main readme should get most people going graphics wise. …

hi @alphanumeric Thanks for the pointer, I think I’ve seen it before. Nice to revisit. p.s. Just saw 1.19.2 out, will update and see. :-) p.p.s. I use text edit in osx, I should really change to something else. tired of getting code switched.

My bme688 is getting 99405 for pressure and 95167 for gas resist. When I covert that pressure number to psi I get around 1440psi (using web formula * 0.0145038). That number doesn’t look right to me, I wonder what all your pressure number look like? And I am digging out what that gas resist numbe…

I just divide it by 100 to get milibars, mb. 994mb would be a very low pressure. It’s 1010mb here as I type this. Something’s not right?

[image] For example, I saw in the above picture got 971.55 hpa (from bme680). And if times 0.0145038 equals about 14, which according to some web source, is about normal ground psi 14. so I question my bme688 reading. hmmm…

[Pico][1.19] Breakout Garden Base + BME688 + 1.54" LCD

Support

alphanumeric July 8, 2022, 9:09pm 23

Have alook in this thread, @Tonygo2 is the one to ask.

Topic		Replies	Views
My Enviro (code) based Weather Station Build Projects	21	2770	May 17, 2022
Need Help: Pico weather station guide using the Pico Explorer Learning Resources	27	3127	October 21, 2021
Pimoroni pico breakout garden base no i2c devices found Support	24	2164	December 21, 2021
Code runs fine from Thonny, but not as main.py Support	14	393	September 7, 2024
Pico W and BME280 Support	19	492	January 13, 2023

[Pico][1.19] Breakout Garden Base + BME688 + 1.54" LCD

Related topics