Adafruit Mini PiTFT setup

[alphanumeric]

Thats one of the things I find most difficult. I used this one for that project.

Large Plastic Project Enclosure - Weatherproof with Clear Top

It’s not waterproof any more but is weather resistant. My build pictures are here.
https://1drv.ms/u/s!AjOYwiwlwDtpgq8_PRQULXcrSq57Bw?e=e1PXTF
The one in the outdoor folder in my portable.

The new RTC is the one breakout I can’t get to work.

RV3028 RTC not passing time to Raspbian?

I ran sudo pip install rv3028 and sudo pip3 install rv3028. Then ran the set-time.py file. And get-time.py shows the correct time. Raspbian isn’t getting the correct time from the RTC though. As a test I let Raspbian sync its time online, ran set-time.py and verified it with get-time.py. Disconnected from the Internet and shut down. On boot up the displayed time is the time it was shut down at, but get-time.py shows the correct time is stored in the RV3028? I even did the manual install, b…