I have a Breakout phat mini with SPI on Pi3. When I execute a luma example ie demo.py or maze.py I get the error SPI device not found. I am using she SPI model of the 1.12’ mono oled. I also have I2C version and it works fine. Any help?

Make sure SPI is enabled in raspberry Pi config. And follow the install instructions listed here [image] 1.12" Mono OLED (128x128, white/black) Breakout – Pimoroni Store A crisp, bright 1.12" OLED that's ideal for adding a small display to your project. This 128x128 pixel, monochrome whi…

Yes, but I can’t remember just now. :( I’ll have to look through my stuff.

This is what I went through with my SPI display on my Breakout garden Mini. Maybe it will help [image] 1.3 color tft LCD on btreakout garden pHat, SPI i2c Support I’m trying to get my 1.3" SPI Colour LCD (240x240) Breakout working with a Breakout Garden pHat The B…

One thing I do remember is that the SPI slot on the BG mini is Slot 1, not Slot 0. [SPI]

For me and my display it was the following for scrolling text.py Mini Breakout Garden port=0, cs=ST7789.BG_SPI_CS_FRONT, # BG_SPI_CSB_BACK or BG_SPI_CS_FRONT backlight=19, # 18 for back BG slot, 19 for front BG slot. I’ll go double check in a bit, but in the end I don’t believe I…

I did get the SPI OLED woking! Thank you all for your help!! The thing that got the ball rolling was raspi-confg enabling SPI. I still do not have a grasp of the spi-port/spi-device concept. Thanks again everyone!!

It goes something like this. You can use those breakouts without the Breakout Garden Hat or Breakout Garden Mini. You solder on a header and connect it to the Pi’s GPIO. The install instructions for the breakout tell you what pin goes to what GPIO etc. Or plug it into the Breakout Garden Hat or Mi…

Breakut Garden 1.12 mono oled

Support

alphanumeric March 11, 2020, 10:29pm 4

This is what I went through with my SPI display on my Breakout garden Mini. Maybe it will help

Topic		Replies	Views
Mini Breakout Garden with SPI not working Support	30	1911	January 9, 2021
Breakout Garden Mini 1.12" OLED display Support	2	491	June 4, 2020
Insane struggle setting up 1.12" mono oled (SPI) Support	19	1866	July 22, 2026
Pi-400 plus Breakout Garden plus 0.96" SPI LCD not working Support	3	478	July 3, 2021
Breakout Garden SPI not working (0.96" screen) Support	9	1014	July 14, 2019

Breakut Garden 1.12 mono oled

Related topics