New HyperPixel Display (non-touch) stopped working


#1

Hi

I got a new pi and hyperpixel display today and set it all up ok but at some point it’s stopped displaying any output.

I’m running non-gui, and my /boot/config.txt looks ok.

The backlight is lit and when rebooting it appears to do a screen “reset” where all pixels are set (except periodic vertical lines) but I don’t get any console output or ultimately login.

The pi is booting ok. There are no hyper* related messages in syslog.

Any ideas or is it faulty ?

Non-commented out lines in /boot/config.txt. -

dtparam=audio=on

dtoverlay=hyperpixel
overscan_left=0
overscan_right=0
overscan_top=0
overscan_bottom=0
framebuffer_width=800
framebuffer_height=480
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
dpi_output_format=0x6f016
display_rotate=2
hdmi_timings=800 0 50 20 50 480 1 3 2 3 0 0 0 60 0 32000000 6