Hi! I did a completely new installation of the system on Raspberry Pi 5 and followed all the instructions, but the disks never appeared. I tried M.2 disks WD Black SN770M 1TB and KINGSTON KC3000 512GB, but they didn’t appear. The white diodes are on but the disks are not detected. What did I do wrong?
sudo nano /boot/firmware/config.txt
dtparam=pciex1
dtparam=pciex1_gen=3
sudo rpi-eeprom-config --edit
Old: BOOT_ORDER=0xf461
BOOT_ORDER=0xf416
PCIE_PROBE=1
~ $ lspci
00:00.0 PCI bridge: Broadcom Inc. and subsidiaries Device 2712 (rev 21)
01:00.0 Ethernet controller: Device 1de4:0001
~ $ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
mmcblk0 179:0 0 119.1G 0 disk
|-mmcblk0p1 179:1 0 512M 0 part /boot/firmware
`-mmcblk0p2 179:2 0 118.6G 0 part /