Hi there. I have been having problems with installing Mopidy as per the directions on pirate audio amp page. I am installing it on Raspberry Pi Zero with Raspbian Buster Lite installed. It’s fully updated and upgraded. Please see the attached images of screenshots taken once the installation suppos…

I have the same issue. Can anyone help?

Thanks Inky_72. I have seen that post. I will wait for a few days to see if they come up with a solution for the Iris to go with Mopidy 3.x

hi have you tryed a copy of stretch i think that was the copy around when the headphone amp was made good luck

Sandy’s written a script that should help with this, if you run the following command in a terminal you should end up with a working installation: curl https://gist.githubusercontent.com/sandyjmacdonald/b72b65d827d85166b4739e12867d9e1b/raw | sudo bash If you want to see the script before running …

Hurrah…IT WORKED FINALLY! After 2 months, it did! Thanks a lot Matt. The Iris web page says to upgrade to 3.44.0 Should I do that or not?

Just googled it and found this: https://github.com/jaedb/Iris/issues/489 So if it’s all working probably best to leave it for now and see what happens with that bug.

Make sense. Thanks once again!!!

Pirate Audio Headphone Amp Mopidy installation failure

Support

Inky_72 February 9, 2020, 6:02am 3

This is what worked for me https://forums.pimoroni.com/t/pirate-audio-3w-stereo-amp-for-raspberry-pi/12710/2?u=inky_72

Topic		Replies	Views
Pirate Audio Black Screen - Broken? Support	4	1946	November 1, 2020
Pirate Audio 3w Amp + Pi Zero 2w - mopidy / Iris install not working Support	3	214	September 23, 2024
Pirate Audio Amp/Software Setup Problems Support	0	858	November 29, 2019
Pirate Audio Headphone Amp Help Support	23	2945	May 15, 2020
Mopidy Iris not playing thru pirate audio Support	1	786	February 23, 2021

Pirate Audio Headphone Amp Mopidy installation failure

Related topics