Building the Picade. With 10 inch screen. Having trouble with the video cable. I was not sure how [20200502_130945] tried to fit the cable and a small bit of plastic shot off the board. Is the clip broken? I am not sure if the cable is in the right place. Do you have any pictures.of how to fit ver…

Maybe this will help 10_Inch_Upgrade_A4.pdf 107.95 KB Its linked too from here [image] Picade 10-inch Display Upgrade Kit – Pimoroni Store Upgrade your Picade to a larger 10-inch* display with this kit. That's 47% more viewing area compared to the st…

Found it [image] LVDS Connector Upside Down for 10" Picade? Picade Newer versions of the 10" screen driver board use a slightly different connector part - the bar that locks the cable into place is the bottom of the connector rather than on the top. The ribbon cable goes …

Hi I have pushed the black plastic part back in. Do you think the cable is in far enough to work? [20200502_130945] Still not sure how it retains lol If I needed a replacement board how much would it cost? Thanks for your help. I am a complete novice

Sorry updated picture [20200502_152825]

I’ve only ever used the ones on the Pi for the display and camera. The cable bottoms out and only goes in so far with the locking bar open. I just look to make sure it straight and level before locking it in. They don’t go in all that far. If it doesn’t work have another try. Just take your time an…

As I said the locking bar shot off:(. I put it back it seemed to lock back into place [20200502_130959] But still unsure how to open it

If I needed a replacement can I buy them? From your store.? Is there anyway to test the screen before I install it? In the box

Ops, I missed the broken off part. You can contact them by e-mail as follows. https://shop.pimoroni.com/pages/contact-us And see if they will send you a replacement. Put a link to this thread in that e-mail.

ok thankyou. it did seem to click back into place but not sure how they are retained. will contact the shop many thanks for your help

do you have a gif of opening the clip? it may help in the future

Picade contruction

Picade

alphanumeric May 2, 2020, 1:50pm 3

Found it

Topic		Replies	Views
LVDS Connector Upside Down for 10" Picade? Picade	12	2382	February 26, 2020
30 Pin Header on 10" LCD Installation Support	9	1172	November 13, 2019
Picade 10inch Screen Picade	8	1032	March 14, 2020
10” Screen Upgrade Edition - Cannot Connect Ribbon Cable Picade	6	689	February 17, 2021
10" screen upgrade Picade	13	2368	March 8, 2019

Picade contruction

Related topics